![background image](http://html.mh-extra.com/html/ifm/e30398/e30398_operating-instructions-manual_620844009.webp)
9
UK
6 Operation
6.1 Save the parameter set of a sensor once
Requirement: The memory plug is used as delivered (empty / [Write protected])�
1
►
Connect the memory plug to the supply
voltage�
Ub
2
►
Connect memory plug and sensor�
> The memory plug reads the parameter set
of the sensor and saves it�
Ub
P
P
Reading process
Process terminated�
Memory plug full / [Write protected]�
UB = Operating voltage; P = Parameter set
The empty memory plug can carry out this process only once� It can be reset to
the factory setting
(→ 6.6.3)
�
Do not install a brand new memory plug before setting the sensor
parameters�
If the memory plug is installed before parameter setting is completed, the
parameter set defined at this point will be saved and any further parameter
change of the connected sensor will be reversed with the next data
exchange�