![background image](http://html.mh-extra.com/html/ifm/e30398/e30398_operating-instructions-manual_620844014.webp)
14
6.6 Configure the memory plug via LR DEVICE
You need an IO-Link master and the LR DEVICE software to connect the
memory plug with a PC�
►
For connection and set-up, refer to the LR DEVICE operating instructions�
> The following information is displayed in the (LR DEVICE) header�
Write protection is not active:
When the memory plug is connected to a suitable sensor, the
parameters of this sensor will be written in the memory plug�
Write protection is active:
When the memory plug is connected to a suitable sensor, the data set
saved in the memory plug will be written in the sensor�
After reading of a memory plug which contains data,
appears� By
clicking on the icon, the parameters of the saved device are displayed,
if this is supported by the respective device. (→ Display of the data
stored on the memory plug)
appears after clicking on
� By clicking on
the parameter
list of the memory plug is displayed again� The icon changes again to
�
The memory plug only provides memory space for the parameters of one
device�
6.6.1 Store data on the memory plug
►
Read IO-Link parameters from a device using the LR DEVICE software or
select offline parameter setting�
►
Edit parameters�
►
Connect the memory plug to the IO-Link master�
►
Click on [ ] to store data on the memory plug�
The write protection is activated via the system command [Write protect]�
The system command [Read/Write] deactivates the write protection�