![background image](http://html.mh-extra.com/html/ifm/e30398/e30398_operating-instructions-manual_620844010.webp)
10
6.2 Save the parameter set of a sensor continuously
Requirement: Memory plug in the [Read/Write] mode�
To change from [Write protected] to [Read/Write] → 6.6 Memory plug parameter
setting�
1
►
Connect the memory plug between the
sensor and the evaluation unit of the
installation�
Ub
P
Display when the memory plug is
empty
Display when the memory plug is full
2
The parameter set of the sensor is changed
(P → P1).
Ub
P1
3
►
Disconnect the memory plug from the
sensor and connect it again�
> The memory plug reads the changed
parameter set P1 and saves it�
Ub
P1
P1
Reading process
Process terminated