![background image](http://html1.mh-extra.com/html/ifm/dx2011/dx2011_manual_3905787002.webp)
Page 2 of 3
Digital to Analog Display / Display Controller
DX2011 DX2012
Programming
702711/01
Step pressing ‘Mode/Enter’, step to dPoint, select
identical decimal position as dPoi A. Press
‘Mode/Enter’ to enter.
Pressing ‘Mode/Enter, return to the menu start-point.
(PrES 1 for DX2012, inPutA for DX2011)
Note: numeric settings are scrolled by holding ‘Set’
until required number is displayed; releasing ‘Set’
moves to next digit. When completed, press
‘Mode/Enter’ to enter and move next menu point.
Then…
Complete the ‘operating parameters’ menu
Press & hold ‘Mode/Enter’ to enter ‘Operating
parameters’ menu.
First enter all decimal points.
Pressing ‘Mode/Enter, step to dPoi A.
By step pressing ‘Set’ select the decimal position.
If ‘dual’ or ‘combined A-b’ inputs were selected:
By step pressing ‘Mode/Enter’, step to dPoi b.
By step pressing ‘Set’, select identical decimal
position as dPoi A. Press ‘Mode/Enter’ to enter.
If ‘combined A–b’ input was selected:
Operating parameters menu
Menu point
Options
Mode
Setpoint output 1
Setpoint output 1
±10 volts
0 – 20mA
4 – 20mA
Numeric value displayed
for minimum input-A signal
Numeric value displayed
for maximum input-A signal
Filter A; damping
display fluctuations
4, 8, 16, OFF
±10 volts
0 – 20 mA
4 – 20mA
Numeric value displayed
for minimum input-B signal
Numeric value displayed
for maximum input-B signal
Filter B: damping
display fluctuations
2, 4, 8, 16
Multiplier factor
Divider factor
Additive constant
Decimal point
Note:
Combined A–B display algorithm = [(A-B) x
mFAc
dFAc
+ pFAc]
Dual input &
combined modes
DX2012
DX2011
Combined
A- B mode
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Mode/Enter
Set
Mode/Enter
Set
Mode/Enter
Set
Mode/Enter
Set
Mode/Enter
Set
Concerning Safety
...ifm efector makes every effort to build a dependable product, but
every product will eventually fail. Therefore, your equipment must be designed to prevent
property damage and personal injury if our products fail. ifm efector switches are not
designed to be used as stand-alone devices to protect or guard human life or limb.
TEL: 800-441-8246 • FAX: 800-329-0436
www.ifmefector.com
ifm efector