6
3.1 IO-Link
3.1.1 General information
This unit has an IO-Link communication interface which enables direct access to
process and diagnostic data� In addition it is possible to set the parameters of the
unit while it is in operation� Operation of the unit via an IO-Link interface requires
an IO-Link capable module (IO-Link master)�
3.1.2 Device-specific information
With a PC, suitable IO-Link software and an IO-Link adapter cable communication
is possible when the system is not in operation� The IODDs necessary for the
configuration of the unit, detailed information about process data structure,
diagnostic information, parameter addresses and the necessary information about
the required IO-Link hardware and software can be found at www�ifm�com�
4 Installation
►
Disconnect power before installation�
►
For installation choose a flat mounting surface�
1
18
43
20
M4
4
Fixture (view from bottom)
1: Front side
►
Attach the fixture for the unit to the mounting surface using the supplied M4
nuts� Tightening torque 1�8 Nm�
►
Only with the models DVx500 and DVx510:
For mounting on a horizontal surface attach the base to the fixture (overlapping
marks on base and fixture) and turn clockwise by approx� 10 ° to fix it� For
mounting on a vertical surface loosen the screw in the base, turn the upper part
