![background image](http://html1.mh-extra.com/html/gardco/pureform-gen-2-p26/pureform-gen-2-p26_installation-instructions_3453296001.webp)
INSTALLATION INSTRUCTIONS
PUREFORM GEN. 2 –
P26 AREA LUMINAIRES—BIRD DETERRENT
P/N 443560818880 Rev B
Page 1 of 1
METAL STRIP
FIGURE 1
1. PLACE (2X) METAL STRIPS ON TOP OF LUMINAIRE WITH STUDS FACING UP AS SHOWN IN FIGURE 1.
2.
BEND ALL FOUR TABS OF THE METAL STRIPS AROUND LUMINAIRE
’
S OUTER EDGE AND INTO TOP
COVER OF LUMINAIRE AS SHOWN IN FIGURE 2 TO SECURE.
3.
ATTACH BIRD DETERRENT SPIKES TO METAL STRIPS USING THE PROVIDED HARDWARE (4X 8
-
32
NUTS).
4.
SECURE THE LOOSE ENDS OF SPIKE STRIPS NEAR THE MOUNTING ARM TO TOP OF LUMINAIRE
WITH VHB TAPE PROVIDED.
5. IF NECESSARY, TRIM ANY ADDITIONAL LENGTH OF SPIKES THAT OVERHANG THE LUMINAIRE.
SPIKES
SECURE
WITH VHB
TAPE
FIGURE 2
(RESULTS MAY VARY)
© 2018 Signify Holding. All rights reserved. This document contains information relating to the product portfolio
of Signify which information may be subject to change. No representation or warranty as to the accuracy or
completeness of the information included herein is given and any liability for any action in reliance thereon is
disclaimed. The information presented in this document is not intended as any commercial offer and does not
form part of any quotation or contract. All trademarks are owned by Signify Holding or their respective owners.
Signify North America Corporation
200 Franklin Square Drive
Somerset N.J. 08873, USA
Signify Canada Ltd./Signify Canada Ltée.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3