Xmart HL-WALL-06, User Manual

Page: 1 / 2

HL-WALL-06
Solar Lamp
USER MANUAL
Parts Identication
Operation Instructions
Installation Instructions
Fix the lamp to the wall with the screw
Solar Panel must be oriented toward sun for battery
charging efciency
Wall
76.10
4.50
10.00
Rear
View
Power On/Off : Press switch for 1.5 Sec, approx.
Mode Change : Press switch shortly to choose
Mode 1, Mode 2, or Mode 3.
Available Modes:
Mode 1
60LM + PIR 2000LM x 10s (Red):
Mode 2 (Green): 120LM + PIR 2000LM x 10s
Mode 3 (Orange): 20 40LMx7H / PIR 2000LMx10s
Battery Power Indication:
> 70% Green:
Orange: Between 30% and 70%
Red: < 30%
Lampshade
PIR
Infrared Receiver
Switch and Indicator
Solar Panel
3
2
1
4
5
Special Features:
Polycrystalline Solar Panel
Li-ion Rechargeable Battery
Congurable Operation Modes
Equipped With PIR Sensor
Material: Aluminum Alloy & PC
2000
lumens
2000
lumens
3
2
1
4
5
www.xmart-ups.com
Select Operation Mode according to your own requirements
WARNING
1. Keep the device away from re and re risk
2. There are no replaceable parts inside the lamp. If disassembled warranty will be void.
3. Do not remove battery for other use. If backup time is too short, lamp’s battery needs to be recharged under bright sunlight
4. Clean solar panel regularly for more efcient operation and longer backup (Suggestion: At least every 6 months)
5. Long term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion
6. Operation temperature for this lamp must comply with Technical Specications
Note: LED Indicator regularly shows Battery Capacity. When
changing Operation Mode it shows selected mode for 5 Sec,
then it returns to show Battery Capacity
T Button on Remote Control
Short press once for 100% bright for 10 min
Short press twice for 100% bright for 20 min
After selected time, lamp will go back to
previous mode.
IMPORTANT
1. Use standard installation accessories
2. If stored, charge the lamp every 3 months, to avoid
battery damage
3. If stored for more than 1 year without charging, make a
charge & discharge process to assure battery is in good
condition, otherwise it is not allowed to use.
HL-WALL-06 - TECHNICAL SPECIFICATIONS / ESPECIFICACIONES TECNICAS
Luminosity / Luminosidad (LM) 2000
SOLAR PANEL / PANEL SOLAR
Type & Capacity / Tipo y Capacidad Polycrystalline / Policristalino, 2W
Li-Ion BATTERY / BATERIA Li-Ion
Capacity / Capacidad 3.7 Vdc / 19.24 WH / 2.600 mAH
Charge & Discharge Temperature /
Temperatura de Carga y Descarga
0 to 45 °C / -20 to 60 °C
Recharge Time / Tiempo de Recarga 13 H
ILLUMINATION / ILUMINACION
LED (OSRAM) 2835 - 40pcs
Light Color Temperature / Temperatura de Color de la Luz 3000K, Ra 80+
Efciency / Eciencia 190 lm/W
OPERATION / OPERACION
Backup (During cloudy days) / Autonomía (con Poca Luz Solar) Up to 10 nights / Hasta 10 noches
Operation Modes / Modos de Operación
Mode 1: 60LM + PIR 2000LMx10s
Mode 2: 120LM + PIR 2000LMx10s
Mode 3: 20 40LM+PIR Untill Dawn/Hasta amanecer
Mode Indication / Indicación de Modo Mode 1: Red/Rojo - Mode 2: Green/Verde - Mode 3: Orange/Naranja
Capacity Indication / Indicador de Capacidad
Green / Verde: >70%
Orange / Naranja: 70% to / a 30%
Red / Rojo: <30%
PIR 120º, >5m
IP/IK Codes / Códigos IP/IK IP65 / IK10
Directives / Normativas CE (IEC60598-1 / IEC60598-2-3 / EN55015 / EN61547)
Installation Height / Altura de Instalación 2.5m to/a 3.5m