![background image](http://html1.mh-extra.com/html/ifm/compactmodule-metal-cr2031/compactmodule-metal-cr2031_device-manual_3908905014.webp)
CompactModule Metall CR2031
14
9 Programming
9.1 General
The I/O module must be initialised as CANopen slave with the CANopen start
functions "COP_MSTR_BOOTUP" and "COP_MSTR_MAIN" by the R 360 master
and set to the state "OPERATIONAL" (LED "PWR"flashes, 2 Hz)�
9.2 Programming function
If the function "CR2031" is integrated into the program, this automatically
ensures a continuous updating of the I/O data in the controller� The function
"CR2031" is in the library "CR2031_x�lib" of the programming software
CODESYS�
If no configuration data are transferred to the I/O module, the device operates
with the default values set at the factory�
Before commissioning change the node ID of the I/O module set at the factory,
if necessary� Check whether the baud rate of the master and that of the module
are identical or set accordingly (also see notes on hex-code switch
)�
Default values:
Switch position
baud rate = 0x04 (= 125 Kbits/s)
S1 = "F“
node ID = 0x20 (= 0d32)
S2, S3 =
"F“
Screen shot of the CODESYS programming platform