IFM AL1120 Operating Instructions Manual Download Page 14

Page: 14 / 110

IO-Link Master with EtherNet/IP Interface StandardLine 4 Ports IP 65 / IP 66 / IP 67

6.2

Ethernet ports

34576

► Connect the unit via the M12 socket X21 and/or X22 with the

EtherNet/IP network (e.g. EtherNet/IP PLC, additional
EtherNet/IP device)



Tightening torque: 0.6...0.8 Nm

► Connect the unit via the M12 socket X21 and/or X22 to the

industrial Ethernet network (e.g. laptop/PC with installed
parameter setting software LR DEVICE, laptop/PC with
installed monitoring software LR SMARTOBSERVER)



Tightening torque: 0.6...0.8 Nm

► For the connection, use M12 connectors with protection rating

IP 65 / IP 66 / IP 67 or higher (

→

Accessories

(

→ S.

)).

► Cover the unused sockets with M12 protective caps (art no.

E73004).



Tightening torque 0.6...0.8 Nm

Summary of Contents for AL1120















































































































Search results

Summary of Contents for AL1120

Reviews:

Related manuals for AL1120

Brands by name

Popular brands

IFM AL1120, Operating Instructions Manual

Search results

Summary of Contents for AL1120

Reviews:

Related manuals for AL1120

Brands by name

Popular brands