5
UK
5.1.1 Restore the factory setting (address both slaves to 0) to AC2489
Recommendation:
Use the addressing unit AC1154 to restore the factory settings.
When AS-i masters are used and „automatic addressing“ is activated restoring the
factory settings is reversed.
Using the addressing unit AC1154 the factory settings of the module are restored
by writing a 0 to ID1 of the second slave (factory setting ID1 = 2).
When the factory settings are restored via the AC1154 the status message [F3] is
displayed.
► Press mode button once to close the status message.
► Operating mode ID2 appears.
► Then press the mode button as long as the addressing mode ADDR is visible
to display the factory settings (address 0).
6 Settings
The AC2488 module occupies only one slave address. The data of the module is
in the analogue range.
6.1 Data bits and value range CTT3 in the M4 Controller
e
and
AC14xx to AC2488
binary IN1 (D0)
binary IN2 (D1)
binary IN3 (D2)
binary IN4 (D3)
binary IN5 (D4)
binary IN6 (D5)
binary IN7 (D6)
binary IN8 (D7)
analogue IN 1 D7...D0 (byte 1) byte 0
analogue IN 2 byte 3 byte 2
analogue IN 3 D7...D0 (byte 5) byte 4
analogue IN 4 byte 7 byte 6
slave address 2A
slave address 2B
