13
UK
Offset (basic value for display and measured value):
The area between the bottom of the vessel and lower face of the measuring
probe can be entered as offset value� Thus the display and switch points
refer to the real vessel level�
setting range
cm
inch
in steps of
LK0022 / LK7022
0 ��� 78
0 ��� 30�6
0�5 cm / 0�2 inch
LK0023 / LK7023
0 ��� 57
0 ��� 22�4
0�5 cm / 0�2 inch
LK0024 / LK7024
0 ��� 186
0 ��� 74�5
1�05 cm / 0�5 inch
Display unit:
2 settings can be selected:
• EU = display in cm (Europe)
• inc = display in inch
Select the display unit before setting the switch points (SPx, rPx)�
This avoids rounding errors generated internally during the conversion of
the units and enables
exact setting of the values�
Min-Max memory:
• HI: Displays the highest measured level
• LO: Displays the lowest measured level
Erase the memory:
- Press the "Mode/Enter" button until “HI” or “LO” is displayed�
- Press the"Set" button and keep it pressed until “- - -” is displayed�
- Then press the "Mode/Enter" button briefly�
