7
UK
4.3 Programming mode
Setting of the parameter values
While viewing a parameter value pressing the "Set" button for more than 5 s
causes the unit to enter the programming mode� You can alter the parameter
value by pressing the "Set" button and confirm the new value by pressing the
"Mode/Enter" button� The internal sensing, processing and output functions of the
unit continue as if in Run mode with the original parameter values unless a new
value is confirmed� The unit returns to the Run mode when no button has been
pressed for 15 s�
5 Installation
5.1 Mounting elements
Mount the unit within the
inactive zone, if possible
(I; mounting area M1)�
The active zone (A)
should be completely in
the vessel�
M1
M2
A
I
A
I
5.2 Mounting recommendation
For an optimum function we recommend: A part of the active zone should be
above the upper edge of the vessel / above the overflow (1 cm for LKx022 /
1�5 cm for LKx023 / 2�5 cm for LKx024)�
You can also fasten mounting elements in the upper half of the active zone
(possible mounting area, M2)� This reduces the active zone to the area between
mounting element and probe end� In this case the mounting element should be
above the upper edge of the vessel / above the overflow (3 cm for LKx022 / 5 cm
for LKx023 / 8 cm for LKx024)�
