IFM Electronic efectror190 DTE100, Device Manual Supplement

Page: 5 / 39

UK
5
3.1 Modules available in the hardware configuration
Application Module name Description Note
Unused channel Channel deactivated Deactivation of the
channel
-
Switching outputs of
sensors, IEC61131
input signal
Input (1 byte In) Cyclic reading of the
input
Data is stored in the
periphery input image of
the controller� No library
access required�
Switching inputs of
controllers, valves,
actuators with 24 V
voltage supply
Output (1 byte In/Out) Cyclic reading of the
output
Data is read from the
periphery output image of
the controller and written
to the output� No library
access required�
RFID antennas of
the ANT51x family
PIB state (2 bytes In/Out ) Acyclic command chan-
nel (MS0/MS1)
Library access required�
RFID antennas of
the ANT51x family
RWH UID (11 bytes In/Out) Cyclic reading of UID
with 64 bits
Data is stored in the
periphery input image of
the controller� No library
access required�
RWH UID (15 bytes In/Out) Cyclic reading of UID
with 96 bits
Data is stored in the
periphery input image of
the controller� No library
access required�
RWH UID (19 bytes In/Out) Cyclic reading of UID
with 128 bits
Data is stored in the
periphery input image of
the controller� No library
access required
RFID antennas of
the ANT51x family
RWH STRG (26 bytes In/
Out)
Cyclic command chan-
nel (MS0)
Library access required�
RWH STRG (34 bytes In/
Out)
Cyclic command chan-
nel (MS0)
Library access required�
RWH STRG (42 bytes In/
Out)
Cyclic command chan-
nel (MS0)
Library access required�
For a detailed description of the modules see the device manual of the
evaluation unit�