IFM Electronic efectror190 DTE100, Device Manual Supplement

Page: 9 / 39

UK
9
Input parameter IN
Name Data type Description
EXECUTE BOOL
0: Deactivate POU
1: Execute POU
0 → 1: Initialisation routine is started.
DPM_SYSTEM_ID BYTE
Number of the DP master system from the S7 hardware confi-
guration
IDU_DP_ADDR WORD
Profibus address of the evaluation unit DTE100 (ident unit,
IDU)
IO1_ENABLE BOOL
0: Deactivate IO-1 interface
1: Activate IO-1 interface
IO2_ENABLE BOOL
0: Deactivate IO-2 interface
1: Activate IO-2 interface
IO3_ENABLE BOOL
0: Deactivate IO-3 interface
1: Activate IO-3 interface
IO4_ENABLE BOOL
0: Deactivate IO-4 interface
1: Activate IO-4 interface
Output parameter OUT
Name Data type Description
ERROR BOOL
0: No error
1: Error occurred, details see STATUS� The POU is not pro-
cessed any further and must be restarted via a positive edge
on EXECUTE�
STATUS WORD
Error code:
1� 0x0000: No error
2� 0x8000: Internal error (e�g� unexpected return value of an
SFC, undefined status word of the evaluation unit)
3� 0x8100: 60s timeout for initialisation expired
4� 0x8101: Evaluation unit does not exist on Profibus
5� 0x8102: No IO interface was activated via IOx_ENABLE
6� 0x8201: Parameter DPM_SYSTEM_ID invalid
7� 0x8202: Parameter IDU_DP_ADDR invalid
8� 0x830x: IOx activated but not available (x = 1���4)
9� 0x840x: IOx with configuration error (e�g� IOx activated
but projected as inactive, input or output or UID module
projected) (x =1��4)
10� 0x850x: IOx could not be initialised (e�g� because the bit
ACP is not implemented at MS1) (x = 1-4)
IO1_READY BOOL
0: IO-1 interface not ready (see STATUS)
1: IO-1 interface ready, commands can be processed