IFM Electronic AL1100 Operating Instructions Manual Download Page 27

Page: 27 / 61

ifm

Operating Instructions IO-Link Master with PROFINET interface StandardLine 4 Ports IP 65 / IP 66 / IP 67 (AL1100)

05 / 2018

Configuration

LR DEVICE

8.1.6

IO-Link ports: Configure operating mode

17439

The IO-Link ports X01...X04 of the device support the following operating modes:



Digital input (DI): binary input signal at pin 4 (C/Q) of the IO-Link port



Digital output (DO): binary output signal at pin 4 (C/Q) of the IO-Link port



IO-Link: IO-Link data transfer via pin 4 (C/Q) of the IO-Link port

The user can set the operating mode separately for each IO-Link port.

To set the operating mode of an IO-Link port:
►

Select [Port x] menu (x = 1...4).

The menu page shows the current settings.

►

Set the following parameters as required:

Name

Description

Possible values

[Mode]

Operating mode of the IO-Link port

[Disabled]

Port deactivated

[DI]

Operation as digital input

[DO]

Operation as digital output

[IO-Link]

Operation as IO-Link interface

[Cycle time actual]**

Current cycle time of the data transfer
between IO-Link master and IO-Link
device on the port (value in
microseconds)

Parameter can only be read

[Cycle time preset]*

Cycle time of the data transfer between
the IO-Link master and the IO-Link
device at the port (value in
microseconds)

The device automatically sets the fastest
possible cycle time.

1
...
132800

1 microsecond
...
132800 microseconds

[Bitrate]**

Current transmission rate of the data
transfer between the IO-Link master and
the IO-Link device on the port

Parameter can only be read

* ... Parameter only available if [Mode] = [IO-Link]
** ... Parameter only visible if the IO-Link device is connected to the IO-Link port.

►

Save changed values on the device.

Summary of Contents for AL1100






























































Search results

Summary of Contents for AL1100

Reviews:

Brands by name

Popular brands

IFM Electronic AL1100, Operating Instructions Manual

Search results

Summary of Contents for AL1100

Reviews:

Brands by name

Popular brands