background image

www.ies-synergy.com

User Manual 

DIM016199-EN

12

6.  Handling and storage instructions

Storage

The charging stations are supplied in individual wood crate. When commissioning the product, all the protec-

tion for transport must be removed before energization. 

Keep the charging station in its original packaging in an appropriate place:

•  placed on dry ground or on a sheet to protect it from damp,

•  sheltered from dust, inclement weather and sunlight.

Storage temperature: -40°C to +70°C

Humidity: 10% to 95% without condensation

During prolonged storage, check the state of the charging station packaging regularly.

Do not store the charging station for more than a year without powering it up, to avoid the deterioration of 

non-energized electronic components.

Transport

Throughout the transport phase, take all necessary measures to keep the pallet stable.

NOTICE

RISK OF DAMAGE TO THE CHARGING STATION

•  Improper storage or handling may cause damage to the unit.

Failure to follow these instructions can result in equipment damage.

 

I

CAUTION

RISK OF INJURY DUE TO DROPPING OR FALLING

•  Follow specified procedures for hoisting operations.

•  Take measures to prevent falling when you carry or transfer the unit.

Failure to follow these instructions will result in minor or moderate injury.

Summary of Contents for Keywatt 19





































Reviews: