www.ies-synergy.com
User Manual
DIM016199-EN
23
Charge with CHADEMO connector
The charger performs an internal check and initialisation.
Please wait for a few seconds.
Initialisation...
→ The Start button flashes for 1 second.
When initialisation is successful:
Connect vehicle and
press ON to start.
9
In case of error (two types of internal fault):
Pwr module failure
0 OK and 2 Fail
No power module
Step 2 Start a new charge
Connect the charging plug to the vehicle (secure firmly).
Then press the “START” Button.
→ The charge status indicator flashes for 1 second.
The charger is starting to communicate with the vehicle.
STARTING SEQUENCE
↓
STARTING COMMUNICATION
Communication has been established.
LOCKING CONNECTOR
