4.2
P
RINTING DOCUMENTS
Preliminary Steps: Before using the printer, perform the following checks:
- Printer is connected to the power supply and the
host data communications system, see page 15.
- Printer is powered up, see page 20.
- Printer is loaded with media, see page 29.
- If necessary, refer to the section describing printer
functions, see page 30
4.2.1 Document printing procedure
- Set the printer to "Online" by pressing the "ONLINE" key.
- Launch a print command from the host system.
The green indicator blinks during printing.
When printing is finished, if the printer is equipped with the cutter
assembly, the document is automatically cut and presented to the
user.
If the printer is not equipped with the optional cutting assembly to
automatically separate documents, use the serrated edges of the
output slot on the front of the printer to manually separate the
printed document, tearing it up or down sharply.
IER 400B
User Guide
Page 32
N0C402B Rev. 1
July 6, 2009
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization