2.1.1.2
Connecting the Printer to the Data Communications
System
CAUTION
To comply with class A FCC regulations it is
necessary to use a data cable provided with a braided
shield.
Use a shielded RS232 cable fitted wit metal plated
connector hoods. The cable shield must be liked to
these hoods and cable length must not exceed 15 m
(49.2 ft).
The length of a USB cable must not exceed 5 m
(16.4 ft).
To connect the printer to the host system, use one of the
interface connectors on the rear connector panel:
- 10/100 base T network port (1)
- USB 2.0 port (2)
- RS232 /DB9 serial port (3) (COM1)
- RS232 /DB9 serial port (4) (COM2).
Note:
In addition, the rear printer connector panel is provided with a USB
Host port (5) to connect a USB key or a Blue Tooth adaptor.
IER 400B
User Guide
Page 18
N0C402B Rev. 1
July 6, 2009
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization