IEMCA MASTER 880 MP E-volution, Manual For Use And Maintenance

Page: 67 / 204

6 - USE AND OPERATION MASTER 880MP E-volution
GB
6 - Pag. 3 / 15
The illustration shows the positions of both the electrical controls and hand-held keyboard "1".
2 MAIN SWITCH: turns the power supply on and off.
- Position 0 (OFF) the machine has no power supply.
- Position I (ON) the machine has power supply.
3 HALF-BUSHING OPENING AND CLOSING SELECTOR (green light)
- In “Manual” mode; if turned to 1, provided that the bar feeder is in proper working
condition and the oil pump is on, the half-bushings close (the selector is lit). When
turned to 0, the half-bushings open (the selector is not lit).
- In “Automatic” mode; if turned to 1 the half-bushings close (the selector is lit) and open
according to a preset sequence. If turned to 0, the half-bushings remain open during the
whole working cycle (the selector is not lit).
4 BAR FEEDER STOP BUTTON (red): to stop the bar feeder and to reset "Errors".
5 EMERGENCY STOP BUTTON: this button stops the bar feeder in an emergency situation. To
restart, first you must manually unlock the button
6 BAR FEEDER START BUTTON AND DISABLING THE BAR REMNANT DETECTION PROCEDURE
(green light): to start the bar feeder, hold down the button until the button itself lights up.
Holding down the pushbutton, disable the remnant and new bar controls during the bar
changeover procedure.