IEMCA MASTER 880 MP E-volution Manual For Use And Maintenance Download Page 76

Page: 76 / 204

6 - USE AND OPERATION

MASTER 880MP E-volution

6 - Pag. 12 / 15

6.7

AUTOMATIC CYCLE START

• Power the lathe on.
• Turn the main power switch to the position I (ON).

• Press

to start the bar feeder.

• Press

to select the manual mode.

• Carry out a “BAR FEEDER ZERO SETTING” in the following way:

-press the start buttons plus

;

INFORMATION:

Axes zero setting can be performed with the guides open or closed.

• Load one bar in the guides and start the automatic cycle. (See section 6.8.).

Summary of Contents for MASTER 880 MP E-volution













































































































































































































Search results

Summary of Contents for MASTER 880 MP E-volution

Reviews:

Related manuals for MASTER 880 MP E-volution

Brands by name

Popular brands

IEMCA MASTER 880 MP E-volution, Manual For Use And Maintenance

Search results

Summary of Contents for MASTER 880 MP E-volution

Reviews:

Related manuals for MASTER 880 MP E-volution

Brands by name

Popular brands