IEMCA MASTER 880 MP E-volution, Manual For Use And Maintenance

Page: 77 / 204

6 - USE AND OPERATION MASTER 880MP E-volution
GB
6 - Pag. 13 / 15
6.8 BAR LOADING - PROCEDURE
INFORMATION:
the bar drop controls will not ascend if, during the "TOTAL GUIDES OPENING"
phase there was a bar in the guide channels that has prevented the short feed
door from resetting.
Initial status:
- the “AUTOMATIC signal FROM LATHE” and “OPEN COLLET” signal must be
received from the lathe
- the bar feeder must be set on its “MANUAL” function
Press* and * to select the “SEMIAUTOMATIC” function
Press and hold it
down until phase execution
has been completed (phase
“GUIDE FULL OPENING”)
Press and to
select the
“SEMIAUTOMATIC” function
Press (phase
“RETURN”)
Press (phase “CLAMP
CLOSING”)
Press phase
“REMOVAL”)
Press (phase “ZERO
AXIS”)
Press (phase
“REMNANT DROP”)