GB
2 - TECHNICAL INFORMATION
KID 70
2 - Pag. 4 / 16
2.2
WORKING CYCLE
The possibile working cycles are listed hereunder:
- REGULAR CYCLE; the bar is fed until it reaches the lathe bar stop.
- FIXED PIECE FEED OUT; the bar feeling is exact and accurate (no lathe bar stop is needed).
In the following paragraphs you will find a concise description of the phases it this working
cycle.
INFORMATION:
for further detailed information about working cycle selection and setting,
please see the side keyboard instruction manual, in particular parameter 29.
2.2.1
REGULAR CYCLE
- At the stop of the lathe
operating cycle, the bar pusher
(A) moves back to the limit stop
position.
- The bar pusher (A) and the "bar
drop control" unit (B) are lifted.
At the same time, also the bar
selecting unit (C) that loads the
first bar on the "bar drop
control" unit is lifted.