GB
2 - TECHNICAL INFORMATION
KID 70
2 - Pag. 8 / 16
- The guide (D) returns to its low
position. The bar pusher (A)
lines up with the loading axis of
the lathe spindle.
- The bar pusher (A) inserts the
bar into the spindle liner. The
bar ejects the remnant (F) as a
residual of the previous
machining, and is positioned for
the facing.
The lathe operating cycle starts at
the beginning of the bar facing
phase.
At this point the bar is precisely fed
according to the value which has
been set, then machining phase
takes place until one oiece has been fullt machined.
The latter phase is repeated several times till the bar has been completely machined.
INFORMATION: In order to save time, it is possible to start the bar change phase when the
lathe is machining th last workpiece.
