GB
5 - ADJUSTMENTS AND SETTING-UP
KID 70
5 - Pag. 2 / 6
5.1
PRELIMINARY NOTE ON ADJUSTMENT
INFORMATION:
Before carrying out any adjustment, start all safety devices provided and check
if it is necessary to inform the staff operating around and people close to the
area. In particular, it is recommended to adequately signal the adjacent areas
and to prevent anyone from approaching all the devices that, if started, could
cause unexpected damages and harm to people.
5.2
MAGAZINE ADJUSTMENT AND BAR SELECTION
Bar magazine adjustment must be carried out according to the section of the bars to be
machined.
The inclination of the bar magazine can be carried out while adjusting the bar magazine
support.
It is possible to increase bar magazine inclination in order to help square or hexagonal bars
slide.
Please follow these instructions to adjust selecting device and bar magazine inclination.
