Iembeddedpc PEB-7605 Series User Manual Download Page 6

Page: 6 / 37

PEB-7605 Series User’s Manual

５

1.2 Product Specification

CPU

◇

Support Intel Pentium Mobile / Celeron M processor up to 2.1GHz and above or Celeron M

processor 800MHz / 1GHz on board

◇

CPU bus clock : 400 MHz

Chipset Intel® 82852GM GMCH & 82801DB ICH4 Main Memory

◇

One 184-pin DIMM socket

◇

256 MB to 1GB using 256MB/512MB/1GB

◇

Supports up to CL2 or 2.5 or 1 DIMMs at DDR200/DDR266/333MHz memory bus.

System BIOS

◇

AWARD BIOS with PC’99 support

◇

FWH 4Mb Flash ROM for easy upgrades

◇

Support ACPI, DMI, PnP, and Green function

Super I/O Winboand W83627EHG

◇

Serial Ports : Support Four RS232 ports

◇

IrDA Interface : Support one Infrared port

◇

Parallel Port : Support one SPP, EPP/ECP bi-directional parallel port

Storage IDE Interface

◇

Support Two Ultra DMA 33/66/100/133 support four IDE devices by one 44-pin(Master)

and one 40-pin IDE connector, one Compact Flash socket (reverse side)

USB

◇

Support 6 x USB 2.0 ports

Keyboard and PS/2 Mouse Interfaces

◇

Support two mini-DIN 6-pin connector for Keyboard and Mouse.

Auxiliary I/O

◇

One 2-pin system reset switch

◇

One 2-pin system power on LED

◇

One 2-pin HDD active indicator interface

◇

One 2-pin ATX power control interface

◇

Two 3-pin headers for CPU and system fan

Real-Time Clock/Calendar (RTC)

◇

Build-in ICH4

◇

Y2K compliant

System Monitoring and Protection

◇

Monitoring system temperature, voltage, and cooling fan status

◇

Auto throttling control when CPU overheats

◇

System automatically restored on recovery of AC power loss

Wake On LAN & Modem Ring on

◇

Support system wake up function from Network and Modem

On-chip VGA Display

◇

Intel® FW82855GM GMCH integrated Extreme Graphics controller

◇

One DSUB-15 connector for CRT display interface.

◇

Two LVDS connectors for 18bit dual channel LVDS panel display interface.

◇

CRT mode :Support Maximum resolution up to 2048 x 1536 for 3D at refresh rates 75Hz.

◇

Multiple Maximum overlay display resolution up to 1600 x 1200 (85Hz)

On-board Ethernet Function

◇

Support dual Ethernet function two RJ-45 interface ports, by Realtek (8100C) Ethernet

controller support 10/100BASE-T

◇

Support two LED indicators to display active and link message

One PCI Interfaces

◇

Support one extended PCI slot compliant with PCI 2.2 specification.

Summary of Contents for PEB-7605 Series






































Search results

Summary of Contents for PEB-7605 Series

Reviews:

Related manuals for PEB-7605 Series

Brands by name

Popular brands

Iembeddedpc PEB-7605 Series, User Manual

Search results

Summary of Contents for PEB-7605 Series

Reviews:

Related manuals for PEB-7605 Series

Brands by name

Popular brands