PEB-7605 Series User’s Manual
14
Chapter 3 System Installation
This chapter provides you with instructions on how to setup your system. The additional information shows you how to
install CPU/ FAN and memory .
3.1 Socket 478 / 479 Processor
3.1.1 Installing Pentium M / Celeron M Processor
I.
The processor socket comes with a screw to secure the processor, please unlock the screw first.
II.
Position the CPU above the socket and the gold triangular mark on the CPU must align with
pin 1 of the CPU socket. Then Insert the CPU gently seated in place.
III.
Turn the screw to the lock position.
Unlock
Pin 1 of the
socket
Lock
Gold
triangular
mark
Note: (1)Do not force the CPU into the socket. It may bend the pins and damage the CPU
(2)The PEB-7605 (On-Board CPU) no need to installed .
3.1.2 Installing Processor FAN Cooler and Heat Sink
i.
Tear the sticker off on the bottom of the CPU cooler which combined with the fan and heat sink.
ii.
Place the CPU cooler right upon the buckle holes.
Fan
Heat Sink
Sticker
Buckle
Buckle holes
