PEB-7605 Series User’s Manual
10
2.2.8 Parallel Port pin header Interface
2.2.9 External USB3 (USB2.0)
This motherboard provides one USB headers on the board allowing for 2 additional USB ports. To make use of this
header, you must attach a USB bracket/cable with USB ports (some models will come packaged with a USB 2-port
bracket-cable). The optionally packaged bracket will have two connectors that you can connect to the headers (USB1,
USB2). The other end (bracket containing the USB ports) is attached to the computer casing.
Note:
If you are using a USB 2.0 device with Windows 2000/XP, you will need to install the USB 2.0 driver from the
Microsoft
®
website. If you are using Service pack 1 (or later) for Windows
®
XP, and using Service pack4 (or later)
for Windows® 2000,you will not have to install the drive
r.
Pin Signal
Description
Pin Signal
Description
1 STB# 2 D0
3 D1 4 D2
5
D3
6
D4
7 D5 8 D6
9 D7 10
SCK#
11 BUSY 12
PE
13 SLCT 14 AFD#
15 ERR# 16 INIT#
17 SLIN# 18 GND
19 GND 20 GND
21 GND 22 GND
23 GND 24 GND
25 GDN 26 NC
Pin Signal
Description
Pin Signal
Description
1 5VSB
2 5VSB
3 Data_A-
4 Data_B-
5
6
7 GND
8 GND
9 NC 10
GND