Print More Materials, All For Application
- 38 -
7. Common Problems and Their Solutions
A few common problems are listed, for more questions please contact the technician directly.
7.1 Movement
Problem
Solution
Problem 1: When extruding, the extrusion gear shake. Increase the print head temperature or determine if
the head is clogged or needs to be reloaded with
material.
Problem 2: One or two of the X, Y, Z and E axes
cannot be moved, and an alarm sound appears when
you click to move
Check if the limit switch is pressed
Problem 3: Opposite direction of motion
Open the firmware and change the control code 1 or
-1
Problem 4: When the machine is running, the power
is off with a "bump" sound, and the machine does not
respond when it is turned on again
Refer to 4.1.2 Use Automatic leveling to print 8th
7.2 Temperature
Problem
Solution
Problem 1: Click heating, the temperature does not
change, a few seconds later prompted the heating
power is insufficient, check the heating head
temperature rise
Note: Be careful when measuring temperature
Reinstall the print head
Problem 2: Temperature display "1023"
Print head is not properly installed
