IEI Technology WAFER-LX3, User Manual

Page: 27 / 247

WAFER-LX3 3.5” Motherboard
Page 7
1 x Power button connector
1 x Power input (–5V/-12V) connector
1 x RS-232/RS-422/485 serial port connector
1 x Suspend power input connector
1 x System reset button connector
1 x TTL LCD connector
1 x USB 2.0 connector
The WAFER-LX3 has the following external peripheral interface connectors on the board
rear panel.
2 x RJ-45 Ethernet connectorss
1 x RS-232 serial port connector
2 x USB 2.0 connectors
1 x VGA connector
The WAFER-LX3 has the following on-board jumpers:
AT/ATX power mode select jumper
CF Card mode select jumper
COM1 and COM2 serial RI port and voltage selection jumper
LCD panel shift clock setting jumper
LCD panel voltage select jumper
RS-422/485 mode select jumper
1.2.3 Technical Specifications
WAFER-LX3 technical specifications are listed in Table 1-1 . See Chapter 2 for details.
Specification WAFER-LX3
Form Factor 3.5”
System CPU AMD Geode™ LX 800
CPU Clock Speed 500 MHz
System Chipset AMD Geode™ CS5536 companion device