IEI Technology WAFER-LX Series User Manual Download Page 22

Page: 22 / 198

Page 22

IEI® Technology, Corp

WAFER-LX

KB/MS

One on-board keyboard/mouse connector

Watchdog Timer

Software programmable 1-255 sec. by supper I/O

Digital I/O

One GPIO connector

Fan connector

One CPU fan connector

Expansion

One PC/104 slot

Power Supply

+5V ± 5% AT/ATX power support

Temperature

0ºC - 60ºC

Humidity (operating)

5%~95% non-condensing

Dimensions

145mm x 102mm

Weight (GW/NW)

670g/230g

Table 1-2: Technical Specifications

1.3 Operating System Packages

1.3.1 Windows XPE SP2 (350MB image size stored in a 512MB CF card)

1. Advance Set Top Box: The package includes the components required to

create the advanced Set-Top Box (ASTB). The package provides the

functionality of the basic set-top box and also supports DVD playback, DVR,

Web browsing, networking, universal serial bus (USB), terminal services, and

Windows Media Player.

2. Internet

Explorer.

3. Net Framework 1.1.

4. EWF (Enhanced Write Filter).

5. CMD - Windows Command Processor.

6. Device Manager and Task Manager.

7. Video / audio and other board chipset drivers.

8. PS/2 keyboard / mouse drivers.

9. IDE Compact Flash/HDD/Flash Disk/CD-ROM support

Summary of Contents for WAFER-LX Series







































































































































































































Search results

Summary of Contents for WAFER-LX Series

Reviews:

IEI Technology WAFER-LX Series, User Manual, Page: 22 / 198

Search results

Summary of Contents for WAFER-LX Series

Reviews: