manualshive.com logo in svg

IEI Technology WAFER-LX Series, User Manual, Page: 114 / 198

Share
Download
IEI Technology WAFER-LX Series User Manual Download Page 114

 

 

Page 114 

 

IEI® Technology, Corp

.

 

WAFER-LX

 

Auto 

 

Onboard Serial Port 3 [Disabled]   

Use the 

Onboard Serial Port 3

 option to select the I/O address and IRQ for the onboard 

serial port 2. The serial port can be disabled or the I/O address and the IRQ can be 

automatically selected by the BIOS. The 

Onboard Serial Port 3

 options are: 

 

Disabled (Default) 

 

3F8/IRQ4  

 

2F8/IRQ3 

 

3E8/IRQ4 

 

2E8/IRQ3 

 

Auto 

 

Onboard Parallel Port [378/IRQ7] 

Use the 

Onboard Parallel Port

 option to specify a logical LPT port address and 

corresponding interrupt for the physical parallel port. The 

Onboard Parallel Port

 options 

are: 

 

Disabled 

 

378/IRQ7 (Default) 

 

278/IRQ5 

 

3BC/IRQ7 

 

Parallel Port Mode [SPP] 

Use the 

Parallel Port Mode

 option to select parallel port operation mode. 

 

SPP 

(Default) 

The parallel port operates in the standard parallel port 

(SPP) mode. This parallel port mode works with most 

parallel port devices but is slow. 

 

EPP 

 

The parallel port operates in the enhanced parallel port 

mode (EPP). The EPP mode supports bi-directional 

communication between the system and the parallel 

Summary of Contents for WAFER-LX Series







































































































































































































Reviews:

No comments