IEI Technology WAFER-LX Series, User Manual, Page: 193 / 198

Page 193
WAFER-LX
connected disk drives has been selected. Follow the same method to select
another member drive.
Step 3:
Step 4:
Confirm . The Create RAID 0 (Y/N) confirm box appears. Press Y .
Name the array . Enter a nickname for the created array. Upper and lower case
alphabetic, numeric, space, and underscore characters are all applicable for
naming an array Step 0:
NOTE:
To reduce the chance of losing data, ALi imposes certain limitations on the
RAID configuration options. Parallel-ATA drives connected on the same IDE
channel cannot be selected as the members of a RAID1 array. Avoid mixing
Parallel-ATA and Serial-ATA disk drives in a RAID1 array.
A.4.4 Stripe Size
Changing the stripe size effects RAID 0 arrays. Configurable options are:
64K (default)
32K
16K
8K
4K
Select a small stripe size if the I/Os to the hard drives are small and occur randomly.
Choose a larger stripe size if the I/Os are mostly large and come in sequential orders, e.g.,
A/V playback and editing applications. The default value should be appropriate for most
applications.
A.4.5 Delete RAID Setting & Partition
WARNING!
If a RAID configuration is deleted, all data previously stored on the member