IEI Technology WAFER-LX Series, User Manual, Page: 189 / 198

Page 189
WAFER-LX
Step 10:
Step 11:
Step 1:
Step 2:
Step 3:
Step 4:
Configure the RAID settings . Use the RAID BIOS Setup Utility in Error!
Reference source not found. to configure the RAID array. Brief descriptions are
given below.
Install the OS . After the RAID array has been configured (see below) install the
OS. To do this, please refer to the documentation that came with the OS.
Step 0:
A.4 RAID Options:
A.4.1 Create RAID 0 Striping for Performance
WARNING!
All data previously stored on the member drives of a RAID configuration are
destroyed during the RAID initialization process. If “used” drives are used to
create a RAID array, make sure the data has been moved or backed up
before creating a RAID array out of the disk drives.
Select “ Create RAID 0 Striping for Performance” . Use the arrow keys to
highlight Create RAID0 Striping for Performance and press E
NTER
. A flashing
‘S’ appears on the Drive Menu where the member drives to be included in the
RAID 0 array can be chosen.
Select RAID array drive members . Use the space bar to select members of the
RAID array. The flashing cursor changes to a lower case ‘s’ once any of the
connected disk drives has been selected. Follow the same method to select
another member drive.
Confirm . The Create RAID0(Y/N) confirm box appears. Press Y .
Name the array . Enter a nickname for the created array. Upper and lower case
alphabetic, numeric, space, and underscore characters are all applicable for