IEI Technology WAFER-945GSELVDS2-N270-R10, User Manual

Page: 55 / 140

WAFER-945GSELVDS2
Page 43
ƒ
Turn all power to the WAFER-945GSELVDS2 off:
o
When working with the WAFER-945GSELVDS2, make sure that it is
disconnected from all power supplies and that no electricity is being fed
into the system.
Before and during the installation of the WAFER-945GSELVDS2 DO NOT:
ƒ
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
ƒ
Use the product before verifying all the cables and power connectors are
properly connected.
ƒ
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2.2 Installation Checklist
The following checklist is provided to ensure the WAFER-945GSELVDS2 is properly
installed.
ƒ
All the items in the packing list are present
ƒ
A compatible memory module is properly inserted into the slot
ƒ
The CF Type I or CF Type II card is properly installed into the CF socket
ƒ
The jumpers have been properly configured
ƒ
The WAFER-945GSELVDS2 is inserted into a chassis with adequate
ventilation
ƒ
The correct power supply is being used
ƒ
The following devices are properly connected
o
SATA drives
o
Power supply
o
USB cable
o
Serial port cable
o
Keyboard and mouse cable
ƒ
The following external peripheral devices are properly connected to the
chassis:
o
VGA screen
o
USB devices