IEI Technology TANK-820-H61 Series, User Manual

Page: 37 / 122

TANK -820-H61 E mbedded S ys tem
P age 24
Figure 3-9: Mounting Bracket Retention Screws
S tep 3: Secure the brackets to the system by inserting two retention screws into each
bracket ( Figure 3-9 ).
S tep 4:
Drill holes in the intended installation surface.
S tep 5:
Align the mounting holes in the sides of the mounting brackets with the predrilled
holes in the mounting surface.
S tep 6: Insert four retention screws, two in each bracket, to secure the system to the
wall.
3.6 Foot P ad Ins tallation
The TANK-820-H61 is shipped with four foot pads. To install the foot pads, follow the
instructions below.
S tep 1:
Turn the TANK-820-H61 to the left side panel.
S tep 2:
Locate the four retention screw holes for the food pad in the bottom surface.
S tep 3:
Align the hole of the foot pad with the retention screw holes on the bottom
surface.
S tep 4:
Secure the foot pad to the chassis by inserting the retention screw.
S tep 0: