IEI Technology TANK-820-H61 Series, User Manual

Page: 87 / 122

TANK -820-H61 E mbedded S ys tem
P age 74

C hange S ettings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D
EFAULT
The serial port IO port address and interrupt address
are automatically detected.

IO=2F8h;
IRQ=3 Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3

IO=3F8h;
IRQ=3, 4 Serial Port I/O port address is 3F8h and the interrupt
address is IRQ3, 4

IO=2F8h;
IRQ=3, 4 Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3, 4

Device Mode [R S 232]
The Device Mode shows Serial Port 2 provides RS-232 communications.
5.3.9.1.3 S erial P ort 3 C onfiguration
 S erial P ort [E nabled]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D
EFAULT
Enable the serial port

C hange S ettings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D
EFAULT
The serial port IO port address and interrupt address
are automatically detected.