IEI Technology PCISA-945GSE Page 37 User Manual Download

Page: 37 / 190

PCISA-945GSE CPU Card

Page 19

3.2 Internal Peripheral Connectors

Internal peripheral connectors are found on the motherboard and are only accessible

when the motherboard is outside of the chassis. This section has complete descriptions of

all the internal, peripheral connectors on the PCISA-945GSE.

3.2.1 ATX Power Control Connector

CN Label:

ATXCTL1

CN Type:

3-pin wafer (1x3)

CN Location:

See Figure 3-3

CN Pinouts:

See Table 3-3

The ATX power supply enable connector enables the PCISA-945GSE to be connected to

an ATX power supply. In default mode, the PCISA-945GSE can only us an AT power

supply. To enable an ATX power supply the AT Power Select jumper must also be

configured. Please refer to Chapter 3 for more details.

Figure 3-3: ATX Power Supply Enable Connector Location

PIN NO.

DESCRIPTION

GND

PS-ON

Summary of Contents for PCISA-945GSE































































































































































































Search results

Summary of Contents for PCISA-945GSE

Reviews:

Related manuals for PCISA-945GSE

Brands by name

Popular brands

IEI Technology PCISA-945GSE, User Manual

Search results

Summary of Contents for PCISA-945GSE

Reviews:

Related manuals for PCISA-945GSE

Brands by name

Popular brands