IEI Technology PCISA-945GSE User Manual Download Page 60

Page: 60 / 190

PCISA-945GSE CPU Card

Page 42

Figure 3-25: LAN Connector

The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green

LED indicates activity on the port and the yellow LED indicates the port is linked. See

Table 3-25.

STATUS

DESCRIPTION

STATUS

DESCRIPTION

GREEN Activity

YELLOW Linked

Table 3-25: LAN Connector LEDs

3.3.2 USB Connectors

CN Label:

USB_C4 and USB_C5

CN Type:

USB port

CN Location:

See

Figure 3-24

CN Pinouts:

See

Table 3-26

The PCISA-945GSE has two external USB 2.0 ports. The ports connect to both USB 2.0

and USB 1.1 devices.

PIN NO.

DESCRIPTION

1 VCC

2 DATA-

3 DATA+

4 GND

Table 3-26: USB Port Pinouts

3.3.3 VGA Connector

CN Label:

VGA1

Summary of Contents for PCISA-945GSE































































































































































































Search results

Summary of Contents for PCISA-945GSE

Reviews:

IEI Technology PCISA-945GSE, User Manual, Page: 60 / 190

Search results

Summary of Contents for PCISA-945GSE

Reviews: