manualshive.com logo in svg

IEI Technology PCISA-945GSE, User Manual, Page: 4 / 190

Share
Download
IEI Technology PCISA-945GSE User Manual Download Page 4

 

 

PCISA-945GSE CPU Card 

Page iv 

Manual Conventions 

 WARNING! 

Warnings appear where overlooked details may cause damage to the equipment or result 

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. 

The word “warning” is written as “

WARNING

,” both capitalized and bold and is followed by 

text. The text is the warning message. A warning message is shown below: 

 WARNING: 

This is an example of a warning message. Failure to adhere to warning 

messages may result in permanent damage to the PCISA-945GSE or 

personal injury to the user. Please take warning messages seriously. 

 CAUTION! 

Cautionary messages should also be heeded to help reduce the chance of losing data or 

damaging the PCISA-945GSE. Cautions are easy to recognize. The word “caution” is 

written as “

CAUTION

,” both capitalized and bold and is followed. The text is the cautionary 

message. A caution message is shown below: 

 CAUTION: 

This is an example of a caution message. Failure to adhere to cautions 

messages may result in permanent damage to the PCISA-945GSE. 

Please take caution messages seriously. 

Summary of Contents for PCISA-945GSE































































































































































































Reviews:

No comments