IEI Technology PCISA-945GSE User Manual Download Page 63

Page: 63 / 190

PCISA-945GSE CPU Card

Page 45

4.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

PCISA-945GSE may result in permanent damage to the

PCISA-945GSE and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the PCISA-945GSE. Dry climates are especially susceptible to ESD. It is

therefore critical that whenever the PCISA-945GSE, or any other electrical component is

handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: - Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

:- Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: When configuring the PCISA-945GSE, place it on an

antic-static pad. This reduces the possibility of ESD damaging the

PCISA-945GSE.

Only handle the edges of the PCB

:-: When handling the PCB, hold the PCB

by the edges.

Summary of Contents for PCISA-945GSE































































































































































































Search results

Summary of Contents for PCISA-945GSE

Reviews:

IEI Technology PCISA-945GSE, User Manual, Page: 63 / 190

Search results

Summary of Contents for PCISA-945GSE

Reviews: