manualshive.com logo in svg

IEI Technology PCIE-9650, User Manual

Share
Download
IEI Technology PCIE-9650 User Manual Download Page 119

 

 

PCIE-9650 PICMG 1.3 CPU Card

Page 101

interrupt if block mode is not used. Block mode allows transfers of up to 64 KB 

per interrupt. 

 

PIO Mode

: Indicates the PIO mode of the installed device. 

 

Async DMA

: Indicates the highest Asynchronous DMA Mode that is 

supported. 

 

Ultra DMA

: Indicates the highest Synchronous DMA Mode that is supported. 

 

S.M.A.R.T.

: Indicates whether or not the Self-Monitoring Analysis and 

Reporting Technology protocol is supported. 

 

32Bit Data Transfer

: Enables 32-bit data transfer. 

 

Type [Auto] 

Use the 

Type

 BIOS option select the type of device the AMIBIOS attempts to boot from 

after the Power-On Self-Test (POST) is complete. 

 

Not Installed

 

 

 

BIOS is prevented from searching for an IDE disk 

drive on the specified channel. 

 

Auto D

EFAULT

 

The BIOS auto detects the IDE disk drive type 

attached to the specified channel. This setting should 

be used if an IDE hard disk drive is attached to the 

specified channel. 

 

CD/DVD 

 

The CD/DVD option specifies that an IDE CD-ROM 

drive is attached to the specified IDE channel. The 

BIOS does not attempt to search for other types of 

IDE disk drives on the specified channel. 

 

ARMD 

 

This option specifies an ATAPI Removable Media 

Device. These include, but are not limited to: 

 

ZIP 

 

LS-120 

 

Summary of Contents for PCIE-9650







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands