IEI Technology PCIE-9452 Page 180 User Manual Download

Page: 180 / 274

PCIE-9452 PICMG 1.3 CPU Card

Page 160

6.5.5 CD/DVD Drives

Use the

CD/DVD Drives

menu to specify the boot sequence of the available CD/DVD

drives. When the menu is opened, the CD drives and DVD drives connected to the system

are listed as shown below:

1st Drive

[CD/DVD: PM-(part ID)]

2nd Drive

[HDD: PS-(part ID)]

3rd Drive

[HDD: SM-(part ID)]

4th Drive

[HDD: SM-(part ID)]

NOTE:

Only the drives connected to the system are shown. For example, if only

two CDs or DVDs are connected only “

1st Drive

” and “

2nd Drive

” are

listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available CD/DVD drives is shown. Select the first CD/DVD drive the

system boots from. If the “

1st Drive

” is not used for booting this option may be disabled.

Summary of Contents for PCIE-9452



















































































































































































































































































Search results

Summary of Contents for PCIE-9452

Reviews:

Related manuals for PCIE-9452

Brands by name

Popular brands

IEI Technology PCIE-9452, User Manual

Search results

Summary of Contents for PCIE-9452

Reviews:

Related manuals for PCIE-9452

Brands by name

Popular brands