IEI Technology PCIE-9452, User Manual

Page: 109 / 274

PCIE-9452 PICMG 1.3 CPU Card
Page 89
Figure 5-9: CF Card Setup Jumper Location
5.4.2 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type: 3-pin header
Jumper Settings: See Table 5-3
Jumper Location:
See Figure 5-10
If the PCIE-9452 fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, use the jumper
cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1
and 2.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following: