IEI Technology PCIE-9452 Page 97 User Manual Download

Page: 97 / 274

PCIE-9452 PICMG 1.3 CPU Card

Page 77

5.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before the PCIE-9452 is installed. All

installation notices pertaining to the installation of the PCIE-9452

should be strictly adhered to. Failing to adhere to these precautions

may lead to severe damage of the PCIE-9452 and injury to the person

installing the motherboard.

5.2.1 Installation Notices

WARNING:

The installation instructions described in this manual should be

carefully followed in order to prevent damage to the PCIE-9452,

PCIE-9452 components and injury to the user.

Before and during the installation please

the following:

Read the user manual:

The user manual provides a complete description of the PCIE-9452

installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD):

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.

Place the PCIE-9452 on an antistatic pad:

When installing or configuring the motherboard, place it on an antistatic

pad. This helps to prevent potential ESD damage.

Turn all power to the PCIE-9452 off:

Summary of Contents for PCIE-9452



















































































































































































































































































Search results

Summary of Contents for PCIE-9452

Reviews:

Related manuals for PCIE-9452

Brands by name

Popular brands

IEI Technology PCIE-9452, User Manual

Search results

Summary of Contents for PCIE-9452

Reviews:

Related manuals for PCIE-9452

Brands by name

Popular brands