IEI Technology Nova-lx User Manual Download

Page: 93 / 225

NOVA-LX 5.25” Motherboard

Page 73

5.3 Unpacking

5.3.1 Unpacking Precautions

When the NOVA-LX is unpacked, please do the following:

Follow the anti-static precautions outlined in Section 5.1.

Make sure the packing box is facing upwards so the NOVA-LX does not fall

out of the box.

Make sure all the components in the checklist shown in

Chapter 3

are

present.

NOTE:

If some of the components listed in the checklist in

Chapter 3

are

missing, please do not proceed with the installation. Contact the IEI

reseller or vendor you purchased the NOVA-LX from or contact an IEI

sales representative directly. To contact an IEI sales representative,

please send an email to [email protected].

Summary of Contents for Nova-lx


































































































































































































































Search results

Summary of Contents for Nova-lx

Reviews:

Related manuals for Nova-lx

Brands by name

Popular brands

IEI Technology Nova-lx, User Manual

Search results

Summary of Contents for Nova-lx

Reviews:

Related manuals for Nova-lx

Brands by name

Popular brands