IEI Technology Nova-lx User Manual Download

Page: 146 / 225

NOVA-LX 5.25” Motherboard

Page 126

Enabled D

EFAULT

USB 1.1 controller enabled

USB 2.0 Controller [Enabled]

The

USB 2.0 Controller

BIOS option enables or disables the USB 2.0 controller

Disabled

USB

function

disabled

Enabled D

EFAULT

USB function enabled

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Auto

Legacy USB support disabled if no USB devices are

connected

6.3.9 IT8888 Configuration

Use the

IT8888 Configuration

menu (BIOS Menu 14) to access the Decode IO Spaces

and Decode Memory Spaces configuration settings so that the system is compliant with

the ISA card implemented on the NOVA-LX.

Summary of Contents for Nova-lx


































































































































































































































Search results

Summary of Contents for Nova-lx

Reviews:

Related manuals for Nova-lx

Brands by name

Popular brands

IEI Technology Nova-lx, User Manual

Search results

Summary of Contents for Nova-lx

Reviews:

Related manuals for Nova-lx

Brands by name

Popular brands