IEI Technology Nova-lx User Manual Download

Page: 126 / 225

NOVA-LX 5.25” Motherboard

Page 106

Secondary Slave

Both D

EFAULT

Allows the system to detect both the Primary and

Secondary IDE channels including the Primary Master,

Primary Slave, Secondary Master and Secondary

Slave.

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. This displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the

IDE Configuration

menu:

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

The

IDE Configuration

menu (

BIOS

Menu 4) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 6.3.2.1

appear.

6.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Summary of Contents for Nova-lx


































































































































































































































Search results

Summary of Contents for Nova-lx

Reviews:

Related manuals for Nova-lx

Brands by name

Popular brands

IEI Technology Nova-lx, User Manual

Search results

Summary of Contents for Nova-lx

Reviews:

Related manuals for Nova-lx

Brands by name

Popular brands