IEI Technology Nova-lx User Manual Download

Page: 149 / 225

NOVA-LX 5.25” Motherboard

Page 129

Disabled

Decoding of the nth space is disabled

Enabled D

EFAULT

Decoding of the nth space is enabled

I/O Decoding Speed

NOTE:

Please refer to the reference material that came with the ISA card to

ensure the correct configuration settings are made.

Use the

I/O Decoding Speed

option to specify the speed at which the nth I/O space that

must be decoded. The following options are available:

Subtractive Speed

Slow Speed

Medium Speed

Fast Speed

I/O Decoding Base Address

Use the

I/O Decoding Base Address

option to specify the base address at which the nth

I/O space that must be decoded. The address must be a four-digit number between

0000

and

FFFF

I/O Decoding Size

NOTE:

Please refer to the reference material that came with the ISA card to

ensure the correct configuration settings are made.

Summary of Contents for Nova-lx


































































































































































































































Search results

Summary of Contents for Nova-lx

Reviews:

Related manuals for Nova-lx

Brands by name

Popular brands

IEI Technology Nova-lx, User Manual

Search results

Summary of Contents for Nova-lx

Reviews:

Related manuals for Nova-lx

Brands by name

Popular brands