IEI Technology NOVA-HM551 User Manual Download Page 134

Page: 134 / 162

NOVA-HM551 5.25" SBC

Page 120

B.2.5 Create Factory Default Image

NOTE:

Before creating the factory default image, please configure the system

to a factory default environment, including driver and application

installations.

To create a factory default image, please follow the steps below.

Step 1:

Turn on the system. When the following screen displays (

Figure B-10

), press

the <

> key to access the recovery tool. The message will display for 10

seconds, please press F3 before the system boots into the operating system.

Figure B-10: Press F3 to Boot into Recovery Mode

Step 2:

The recovery tool menu appears. Type <

> and press <

Enter

>. (

Figure B-11

)

Figure B-11: Recovery Tool Menu

Step 3:

The About Symantec Ghost window appears. Click

button to continue.

Summary of Contents for NOVA-HM551



































































































































































Search results

Summary of Contents for NOVA-HM551

Reviews:

Related manuals for NOVA-HM551

Brands by name

Popular brands

IEI Technology NOVA-HM551, User Manual

Search results

Summary of Contents for NOVA-HM551

Reviews:

Related manuals for NOVA-HM551

Brands by name

Popular brands